Non-curing Rubber Bitumen Coating
Non-curing Rubber Bitumen Coating
Product Name: 18L Bucket Non-curing Rubber Bitumen Waterproof Coating, Self-healing Adhesive Waterproof Layer For Roof & Underground
Specifications
Item | Specification |
Full Name | NON-CURING RUBBER BITUMEN COATING |
Brief Introduction | Non-curing rubber modified bitumen waterproof coating that remains sticky and elastic permanently. Self-healing, excellent adhesion, used as adhesive and waterproof layer combined with waterproof membrane. Never fully cures, stays flexible. |
Core Advantages | 1. Never cures, permanently sticky and elastic 2. Self-healing, punctures auto-seal 3. Excellent adhesion to all substrates 4. No shrinkage, no cracking 5. Combines adhesive and waterproof function 6. Compatible with SBS/APP modified bitumen membrane |
Application Scenarios | Roof waterproofing with membrane, basement, underground garage, tunnel, bridge deck, pool, foundation waterproofing |
Mix Ratio | Ready to use; heat to 80–100°C for spray application, or apply directly at room temperature with trowel |
Storage & Shelf Life | Seal bucket, store at 5℃–40°C, avoid direct sunlight; shelf life 12 months |
Package Info | 18L metal bucket with airtight lid; custom labels available |
Product Certifications | ISO9001 certification, non-curing performance test report, adhesion test report |
Factory Support | OEM & ODM acceptable; adjust softening point and viscosity; free technical support |
Technical Parameters
Parameter | Value |
Single Bucket Capacity | 18L |
Product Type | Non-curing rubber modified bitumen coating |
Solid Content | ≥98% |
Adhesion | ≥0.5 MPa (no interface failure) |
Self-healing | Puncture auto-seals within 24h |
Low Temperature Flexibility | -20°C no crack |
Heat Resistance | 80°C no flow |
Elongation | ≥800% |
Operating Temperature | 5℃ ~ 40℃ |
Storage Life | 12 months |
Construction Method
Base Surface Treatment: Clean, dry and flat base; remove sharp objects; can apply on damp surface but no standing water.
Preparation:For spray: heat material to 80–100°C in melting equipment; for trowel: use directly at room temperature.
Application: Spray or trowel apply 1.5–2.5mm thick; immediately lay SBS/APP membrane while coating is sticky, roll to ensure full bonding.
Finishing:Overlap membrane joints 100mm, seal edges with coating; no protective layer needed for buried application.
Order & Delivery Terms
MOQ: Full 20ft container; small trial order can be negotiated
Production Lead Time: 7–12 working days after receiving deposit
Loading Port: Shenzhen Port / Guangzhou Port
Payment Terms: 30% T/T deposit, 70% balance before shipment; Irrevocable L/C at sight supported
Supply Capacity: 3000 tons per month
After-sales Support
Free online professional construction technical guidance for overseas construction teams
Complete factory inspection report and full set customs clearance documents provided
Adjust product formula according to local climate and wall construction requirements
Free replacement for unqualified goods caused by production within shelf life
